VTech 15150 - Managing Remote Access Code

65
REMOTE ACCEss CODE
A four-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 0000. You can set the code
from 0000 to 9999.
To turn ON/OFF the remote access:
Press MENU when the phone is not in use. And then
press
or to scroll to ANS. MACHINE.
Press SELECT and
or to scroll to
TAM SETTINGS.
Press SELECT and
or to scroll to
REMOTE ACC.
Press SELECT and
or to choose ON or OFF.
Press SELECT

To change the PIN code:
Press MENU when the phone is not in use. And then
press
or to scroll to ANS. MACHINE.
Press SELECT and
or to scroll to
TAM SETTINGS.
Press SELECT and
or to scroll to
CHANGE PIN.
Press SELECT and enter the old system PIN.
Press SELECT and enter the new system PIN.
Press SELECT and enter the new system PIN again.
Press SELECT 
tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.