VTech 80-065041 - Nitro Web Notebook - Getting Started; Power Source; Battery Installation; Battery Notice

2
GETTING STARTED
POWER SOURCE
The Nitro Web Notebook
™
operates on 3 “AA” sized batteries (AM-3/LR6) or
a VTech
®
9V adaptor (sold separately). The “AA” sized batteries included in
the unit are for demo purposes only and are not long-life batteries.
If you are using a power supply adaptor, please remember to empty the
battery slot rst.
BATTERY INSTALLATION
NOTE: For best performance, remove all factory
installed batteries and use new
,
alkaline batteries.
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit
and open it.
3. Insert 3 “AA” sized batteries as illustrated.
4. Close the battery cover.
RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.
BATTERY NOTICE
• Theuseofnewalkalinebatteriesisrecommendedformaximumperformance.
• Do not try to recharge non-rechargeable batteries.
• Rechargeablebatteriesaretoberemovedfromthetoybeforebeing
charged.
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-zinc)or
rechargeable (nickel-cadmium).
• Donotmixnewandusedbatteries.
• Onlyusebatteriesoftherecommendedorequivalenttype.
• Installbatteriescorrectlyobservingthepolarity(+,-)signstoavoidleakage.
• Batteriesthathaverunoutofenergymustberemovedfromthetoy.
• Donotshortcircuitthesupplyterminals.
• Donotusemorebatteriesthanrecommended.
• Removebatteriesfromthetoyifitwillnotbeusedforanextendedperiodoftime.
• Donotdisposeofbatteriesinre.
GETTING STARTED