EN - 13
English
Replacing coiled handset cord
To replace the coild handset cord:
1. Hold the handset upside down.
2. Press both thumbs down on the edge of
the handset back cover near the back of
the earpiece, and slide the back cover
upwards.
3. Lift the back cover off the handset.
4. Unplug the coild handset cord from the
handset cord jack.
5. Plug another coild handset cord to the
handset cord jack.
6. Align all the tabs on the handset cover
against the corresponding grooves on
the handset, then slide the handset cover
closed.
Installation Notes
Caution! Please be careful of sharp edges
of base stand that can cause harm during the
installation process.
Avoid placing the phone too close to:
• Communication devices such as television
sets, DVD players, or other cordless
telephones
• Excessive heat sources
• Noise sources such as a window with
traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting
• Excessive dust sources such as a workshop
or garage
• Excessive moisture
• Extremely low temperature
• Mechanical vibration or shock such as on
top of a washing machine or work bench
To Next Page
Loading...
