11
A
/
• Turn on/o the adaptive night light feature. When this feature
is on, the baby unit detects the ambience light. If the room is
bright, the night light adjusts itself to be brighter; if the room is
dim, the night light adjusts itself to be less bright.
VOX (Voice Activated Alert) Settings
Sound activation - screen and audio
• You can set VOX sensitivity level to activate parent
unit screen and sound when baby unit detects sounds
that exceed certain levels. See Sound sensitivity and
sound activation section.
/
Turn on/o sound activation
• Set sound activation on or o.
• When it is on, and the baby unit detects no sound, the parent
unit screen stays o to save power. Once a sound is detected,
the parent unit screen and speaker turns on automatically, and
you can see and hear your baby. The parent unit will then turn
o again after 50 seconds of no sound detection.
Note:
• When the parent unit screen is o and it receives alerts, for
example, link lost between parent unit and baby unit, or battery
is low, the parent unit screen and speaker will turn on for 10
seconds.
Alert Tone Settings
• Set the parent unit to beep when the battery is low.
• Set the parent unit to beep when the link between the parent
unit and the baby unit is lost.
• Set the conrmation tone on or o when selecting an option
inthe menus.
• Set the parent unit to beep when the baby unit detects sounds
while in Split mode (For BM5550-OWLN-2 only).
To Next Page
Loading...
Need help?
General
