29
Dim Mode
Dim Mode automatically activates to helps you save parent unit power and cannot
be turned o.
The parent unit display will dim to conserve energy after 10 minutes of inactivity
when no keys are pressed or alerts are received from the baby unit.
10 mins inactive
Press any button
Night Vision
The baby unit has infrared LEDs that allow you to see your baby clearly at night
or in a dark room. When the baby unit being viewed detects low light levels, the
infrared LEDs switch on automatically.
When the night vision mode is activated, the images from the baby unit are in
black and white, and also appear on the screen.
Notes:
• It is normal to see a short white glare
on your parent unit screen as the baby unit
adapts to the dark environment.
• If you adjust the night vision mode while
night vision is not activated, the new settings
will be saved and applied the next time it
activates.
Tip:
The video quality may vary depending
on the surrounding environment and
interfering factors like lighting, objects, colour
and backgrounds. Adjust the baby unit angle
or place the baby unit at a higher elevation to
prevent glare and a blurry display.
To Next Page
Loading...
Need help?
General
