VTech BM5250N - Page 11

11
Alert Tone Settings
• Set the parent unit to beep when the battery is low.
• Set the parent unit to beep when the link between the parent unit
and the baby unit is lost.
• Set the conrmation tone on or o󰀨 when selecting an option
inthe menus.
• Set the parent unit to beep when the baby unit detects sounds
while in Split mode (For BM5250N-2 only).
Temperature
/
• Turn on/o󰀨 temperature alert tone.
• Set the parent unit to beeps whenever the room temperature
detected by the baby unit falls outside of the set temperature range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
o
F) or Celsius (
o
C).
Baby Unit Setting
Baby unit speaker volume
• • Adjust the baby unit’s speaker volume.
Monitoring Mode (For BM5250N-2 only)
Single CAM mode
• The screen displays images only from the selected baby unit in
full screen.
Split mode
• The screen displays images from all the paired baby units at the
same time in split view.
Patrol mode
• The screen displays a single cam view that transitions to a
di󰀨erent baby unit every 10 seconds.