15
Charge the Parent Unit Battery
The parent unit runs on rechargeable battery or AC power. To continuously monitor
your baby, keep the parent unit connected to AC power.
The parent unit turns on automatically after it connects to the power socket for the
rst time using, and its battery will charge at the same time.
Notes:
• Before using the baby monitor for the rst time, charge the parent unit battery for 12 hours.
When the parent unit battery is fully charged, the battery icon becomes solid .
• The standby time varies depending on your actual use.
The battery icon on the screen indicates the battery status (see the following
table).
Battery Indicators Battery Status Action
The screen displays
or .
The LED light
ashes.
The battery power is very
low and may only be used used
for a short time.for a short time.
Charge without interruption
(about 30 minutes).
The battery icon
becomes solid .
The battery is fully
charged.
To keep the battery
charged, connect it to AC
power when in use.
To Next Page
Loading...
Need help?
General
