VTech Bugsby Reading System User Manual

CARE AND MAINTENANCE
1. Keep the Bugsby unit clean by wiping it with a slightly damp
cloth.
2. Keep the unit out of direct sunlight and away from direct sources
of heat.
3. Remove the batteries when the unit will not be used for a long
period of time.
4. Do not drop the unit on hard surfaces or try to dismantle it.
5. Do not immerse the unit in water or get the unit wet.
TROUBLESHOOTING
1. If your Bugsby pen stops working or does not turn on:
• Check your batteries. Make sure the batteries are fresh and
properly installed.
• Insert the tip of a paper clip (or a similar object without a sharp tip)
into the small hole at the left side of the unit labeled “Reset.”
NOTE: After resetting, default settings
will be restored.
• If you are still having problems, visit
our website at www.vtechkids.com for
troubleshooting tips.
2. If after pressing the On/Off button, nothing
happens:
• Check to see that inserted batteries are
aligned correctly.
CARE AND MAINTENANCE
5

VTech Bugsby Reading System Specifications

General

Brand	VTech
Model	Bugsby Reading System
Category	Toy
Language	English