Getting started
7
Pendant battery charging
The pendant status light indicates the battery status (see the
table below).
If necessary, place the pendant in the pendant charger to charge
the battery. For best performance, keep the pendant in the pendant
charger when not in use. The battery is fully charged after 3 hours of
continuous charging.
If the pendant status light flashes red and you hear “Low battery,” you
need to charge the pendant without interruption to give the pendant
enough charge to use for a short time. When the battery is low, the
pendant light flashes red. If you are on a call in low battery mode, the
pendant plays short beeps to alert you.
The following table summarizes the battery charge indicators and
actions to take.
Battery indicators Battery status Action
The pendant status light flashes
red. You hear “Low battery” when
there is only 30 minutes talk time
left. You hear an alert tone every
one minute.
The battery has
very little charge.
Charge without
interruption.
The pendant status light is
solid red.
The battery has
enough charge to
be used for a short
time.
Charge without
interruption.
To Next Page
Loading...
Need help?
General
