9
Initial basic settings
Aer you install your telephone or power returns following a power outage, the
handset and telephone base will prompt you to set the date and time. To skip
setting the date and time, press on the handset.
Voice guide to set Smart call blocker and
answering system
Aer the date and time setting is done or skipped, the telephone base will prompt
if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call
blocker setup via voice guide. To skip the setup, press .
Aer the Smart call blocker setting is done or skipped, the telephone base will then
prompt if you want to set up the answering system. Press MENU/SELECT to start the
answering system setup via voice guide. To skip the setup, press .
We recommend you program your telephone system before use. The following
are a few examples of common features to set before using the telephone. Refer to
the Handset and telephone base settings and Answering system settings in the
Complete user’s manual for detailed instructions on setting all telephone features.
Note: You can restart the voice guide to set Smart call blocker by resetting your handset power.
Date and time
Note: Set the date/time before using the answering system.
1. -> or -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys -> SELECT.
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> SELECT.
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
1. -> or -> Answering sys -> SELECT.
2. or -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated numbers, as
instructed.
To Next Page
Loading...
Need help?
General
