13
Connect and charge
Install the battery
NOTES
• Use only the battery provided.
• Charge the battery provided with this
product only in accordance with the
instructions and limitations specified
in this manual.
• If the handset will not be used for a
long time, disconnect and remove
the battery to prevent possible
leakage.
Connect the telephone base
NOTES
• Use only the adapters provided.
• Make sure the electrical outlets are
not controlled by wall switches.
• Connect the power adaptor in a
vertical or floor mount position only.
The adapter’s prong is not designed
to hold the weight of unit, so do not
connect it to any ceiling, under-the-
table, or cabinet outlets. Otherwise,
the adaptor may not properly
connect to the mains.
a
b
c
To Next Page
Loading...
Need help?
General
