VTech CS2051 Series User Manual

23
NOTE
• If there is no number in the list, the
display shows EMPTY.
Delete a redial list entry
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
3. Press , and then press ▼/▲ to
select DELETE.
4. Press twice to confirm.
Delete all redial entries
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
3. Press , and then press ▼/▲ to
select DELETE ALL.
4. Press twice to confirm.
Find handset
This feature helps you find all system
handsets.
CAUTIONS
• Do not press and hold for more
than four seconds. It may lead to
handset deregistration.
• If the handset displays To register
HS... and ...see manual, refer to
Frequent asked questions to register
the handset back to the telephone
base.
To start paging
Press on the telephone base.
• All idle handsets ring and display
PAGING.
NOTE
• Paging tone continues on the other
handset.
To end paging
• Press again on the telephone
base;
• Press , , on the handset;
or
• Place the handset in the handset
base / charger.
NOTE
• Paging tone stops when paging
stops.

VTech CS2051 Series Specifications

General

Brand	VTech
Model	CS2051 Series
Category	Telephone
Language	English