10
Volume
Press /VOL-/CID or /VOL+/ to adjust the listening volume during a
conversation.
Channel
Press CHAN/REMOVE to switch to a clearer channel while on a call.
•
•
Call waiting
If you subscribe to call waiting service and you are on a call when a new
call comes in, you will hear a beep. The caller ID information is displayed if
you subscribe to combined caller ID with call waiting service from your local
telephone service provider.
Press on the handset to put the current call on hold and answer the
incoming call.
Press at anytime to alternate between calls.
Temporary tone dialing
If you have pulse (rotary) service, you can change from pulse to touch tone
dialing during a call by pressing TONE
*
. This is useful if you need to send
touch tone signals to access telephone banking or long distance services.
Once you have initiated your call by dialing the phone number in pulse (rotary),
press TONE
*
. Now, all subsequent key presses are sent as touch tone signals.
After you hang up, the phone returns to pulse (rotary) dialing for the next call.
•
•
Make calls
Press and then use the dial pad keys to dial a number.
-OR-
Enter the phone number rst. You can press to backspace and press
CHAN/REMOVE to erase digits.
Press to dial.
Answer calls
Press any dial pad keys (except /VOL-/CID, /VOL+/ and OFF) to answer
an incoming call.
End calls
Press OFF or put the handset back to the telephone base to end a call.
•
1.
2.
•
•
The call timer is activated during a call to show call duration.
The handset beeps if it is moved out of range while on a call.
•
•
Telephone operation
To Next Page
Loading...
Need help?
General
