VTech CS5111 User Manual

11
Telephone operation
Redial
The telephone stores the ve most recently dialed telephone numbers in the
redial list. When the list is full, the oldest entry is deleted to make room for
the new entry.
Press REDIAL/PAUSE, then press , or REDIAL/PAUSE repeatedly to
review the redial list. Press CHAN/REMOVE to delete the displayed number.
Press , then press REDIAL/PAUSE to dial the last telephone number
dialed.
-OR-
Press REDIAL/PAUSE, then press , or REDIAL/PAUSE repeatedly until
the desired entry displays, then press to dial the number.
Find handset
Press FIND HANDSET on the telephone base to locate the handset when
the telephone is not in use and the handset is not placed in the telephone
base. The handset rings and
**
PAGING
**
will be
displayed on its screen.
Press FIND HANDSET again or put the handset back
on the telephone base to stop the paging tone.
-OR-
Press OFF on the handset.
•
•
•
•
•
Directory
The directory can store up to 20 entries (including nine speed dial entries).
Each entry may consist of a number up to 24 digits and a name up to 14
characters.
Store a directory entry
Press PROG when the handset is not in use. The screen displays DIRECTORY.
Press SELECT. The screen displays ENTER NAME.
Use the dial pad keys to enter the name. See the Character chart on page 12.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a character.
When nished, press SELECT or PROG. The screen displays ENTER NUMBER.
Use the dial pad keys to enter the telephone number.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a digit.
Press REDIAL/PAUSE to insert a dialing pause (P is displayed).
Press SELECT or PROG to conrm and you hear a conrmation tone.
1.
2.
3.
•
•
4.
5.
•
•
•
6.

VTech CS5111 Specifications

General

Brand	VTech
Model	CS5111
Category	Telephone
Language	English