29
Answering system operation
When the memory is full, the answering system answers incoming calls after
10 rings and announces, “Memory is full. Enter the remote access code.”
•
Window display Description
0
No messages.
1-99
Total number of old messages recorded.
Current message number during old message playback.
0-99 (ashing)
Total number of new messages recorded, or the current message
number during new message playback.
The clock needs to be set.
1-99 & F (alternating)
Memory is full with total number of messages recorded.
1-8
Telephone base speaker volume level while adjusting.
--
The telephone is busy with a call or in the call log
The answering system is being accessed.
0-6
Telephone base ringer level while adjusting.
Message window displays
To Next Page
Loading...
Need help?
General
