7
Home area code
If you dial local calls using only seven digits
(area code not required), you can program
your home area code so that when you
receive a call within your local area, the
telephone number is automatically stored
in the caller ID log without the area code.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Home area
code, and then press SELECT. The
screen displays the currently stored
home area code.
4. Use the dialing keys (0-9) to enter the
desired home area code.
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all
digits.
5. Press SELECT to confirm. You hear a
confirmation tone.
N OTE
• If, in the future, your telephone service
provider requires you to dial the area code
when making a local call, or, if you move to
a location that requires it, delete the home
area code you have already programmed
following the steps above. After you have
deleted the home area code, ___ appears.
Dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings, and
then press SELECT.
3. Press q or p to choose Dial mode,
then press SELECT.
4. Press q or p to choose Touch-tone
or Pulse, then press SELECT to confirm
your selection. You hear a confirmation
tone.
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This is
useful if you need to send touch-tone
signals to access your telephone banking
or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the
number. The telephone sends touch-
tone signals. It automatically returns to
pulse dialing mode after you end the
call.
To Next Page
Loading...
