EasyManua.ls Logo

VTech CS6324 - Sound Settings; Key Tone; Ringer Tone; Telephone Base Ringer Volume

VTech CS6324
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Sound settings
Key tone
You can turn the key tone on or off.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Key tone, then
press SELECT.
4. Press q or p to choose On or Off,
then press SELECT to save. You hear a
confirmation tone.
Ringer tone
You can choose from different ringer tones
for each handset.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Ringers and
then press SELECT.
3. Press q or p to choose Ringer tone,
then press SELECT.
4. The screen displays Tone: with the
current setting flashing. Press q or p
to choose a ringer tone. A sample of
each ringer tone plays as you scroll
through the choices.
5. Press SELECT to save. You hear a
confirmation tone.
NOTESNOTE
N OTE
If you turn off the ringer volume, you will not
hear ringer tone samples.
Telephone base ringer volume
Press VOL + or VOL - on the telephone
base to adjust the ringer volume when the
telephone base is not in use.
When you set the ringer volume to zero,
the base ringer is off. The telephone base
announces, “Base ringer is off.
Handset ringer volume
You can adjust the handset ringer volume
level, or turn the ringer off.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Ringers and
then press SELECT twice.
3. The screen displays Volume: with the
current setting flashing. Press q or p
to choose a volume level. A sample of
each ringer volume plays as you scroll
through the choices.
4. Press SELECT to save. You hear a
confirmation tone.
NOTESNOTE
N OTES
If the ringer volume is set to Off, the idle
screen displays Ringer off.
When the ringer volume is set to Off, the
handset still rings when you press FIND HS at
the telephone base.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
Press CANCEL or MUTE. The handset
displays Ringer muted.
To silence the telephone base ringer:
Press VOL - once.

Table of Contents

Related product manuals