19
Make a call
Press /FLASH or . You hear a dial tone.
Dial the number.
Predial a call
Dial the number.
Press /FLASH or .
Answer a call
Press /FLASH, or any of the dialing keys (0-9, #, TONE ).
End a call
Press OFF/CLEAR or put the handset in the telephone base or charger.
Speakerphone
During a call, press to switch between speakerphone and normal
handset use. When the speakerphone is active, the handset screen
shows SPEAKER.
Volume
During a call, press VOL/ or VOL/CID to adjust the
listening volume.
Make a call using speed dial
Press and hold a dialing key (0-9) to display the speed
dial number.
Press /FLASH or .
1.
2.
1.
2.
1.
2.
Telephone operation
If you try to make a call on a empty speed dial location, the system will prompt
you to the setup of the speed dial location (see page 30).
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
When predialing (preview numbers before dialing), press MUTE/REMOVE or
OFF/CLEAR to backspace and delete; press and hold REDIAL/PAUSE to insert
a dialing pause (a P appears).
•
•
To Next Page
Loading...
Need help?
General
