VTech CS6419 User Manual

25
Create a new directory entry (continued)
-OR-
Enter the number when the handset is not in use.
Press MENU/SELECT and the screen displays
EDIT NUMBER.
Use the dialing keys to edit the number.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press or to move the cursor to the left or right.
Press and hold REDIAL/PAUSE to enter a dialing pause
(a P appears).
Press MENU/SELECT to move to the name. The screen shows EDIT NAME.
Use the dialing keys to enter the name. Additional key presses show other
characters of that particular key. Press the key repeatedly until the desired
character appears. The first character and the character after a space are
automatically capitalized.
Press 0 to add a space.
Press or to move the cursor to the left or right.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press MENU/SELECT to save. The screen displays SAVED and then you hear
a confirmation tone.
1.
2.
3.
•
•
•
•
4.
5.
•
•
•
•
6.
If you pause for too long while storing an entry, the procedure times out and you
have to begin again.
EDIT NUMBER
800-595-9511_
EDIT NAME
Mike Smith_
Directory

VTech CS6419 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery voltage	2.4V Ni-MH
telephone base power	6V AC @ 300mA
charger power	6V AC @ 300mA

Memory

handset directory memory locations	50
handset directory digits capacity	30 digits
handset directory characters capacity	15 characters