31
Multiple handset use
Call transfer using intercom
To transfer a call at the telephone base:
1. During a call, press INT.
If you have only one handset, the outside call is put on
hold and the telephone base shows Calling HS 1. The
handset rings and shows Base is calling.
If you have two or more handsets, the telephone base
shows Intercom to. Use the dialing keys to eenter a
handset number. The outside call is put on hold and the
telephone base shows Calling HS X. The destination
handset shows Base is calling.
2. To answer the call on the destination handset, press, press
, INT, , or any dialing key (0-9, TONE or QUIET#).
The outside call is still on hold and both devices display
Intercom. You can now have a private intercom conversation.
To cancel the intercom call before it is answered, press
CANCEL or INT on the telephone base.
If the destination handset is not powered, out of range,
on a call, or does not answer the intercom call within
100 seconds, your telephone base displays
Unable to call and then automatically returns to the
external call.
•
•
3. From this intercom call, you have the following options:
You can transfer the call. Press or place the corded handset back to the
telephone base. Both screens display Intercom ended. The destination handset
is then connected to the outside call.
The other party can press OFF on the handset to end the intercom call. The
telephone base is still connected to the outside call.
You can let the other handset join you on the outside call in a three-way
conversation. Press SELECT on the telephone base.
•
•
•
•
•
Intercom to
Base is calling
ECO
10:01
AM
11/20
Intercom
MSG #
1
To Next Page
Loading...
Need help?
General
