Getting started
3
Handset battery installation
Install the battery as shown below.
Plug the battery connector securely into the socket inside the handset battery
compartment, matching the engraved label.
Place the battery with the label THIS SIDE UP facing up and the wires inside the
battery compartment.
Align the cover flat against the battery compartment, then slide it towards the center
of the handset until it clicks into place.
Place the handset in the handset charger to charge. The CHARGE light is on when
the handset is charging.
1.
2.
3.
4.
If the handset will not be used for a long time, disconnect and remove the battery to
prevent possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
•
•
1
2
3 4
CHARGE light
remains on when
charging.
To Next Page
Loading...
Need help?
General
