VTech CS6719-27

12
Volume control
During a call, press /VOLUME/ .
NOTES
The handset and speakerphone volume
settings are independent.
When the volume reaches the minimum or
maximum setting, you hear two beeps.
Mute
The mute function allows you to hear the
other party but the
other party cannot hear you.
During a call, press MUTE. The handset
displays Muted until the mute function
is turned off.
Press MUTE again to resume the
conversation. The handset briefly
displays Microphone on.
Join a call in progress (for multiple
handset models only)
Another handset can join you on a home
call. That call continues until all parties
hang up. You can share an outside call
with up to two handsets at the same time.
You can buy additional expansion
handsets (CS6709) for this telephone
base. You can register up to five devices
to the telephone base.
To join a call::
When a handset is already on a call,
press or on another handset to
join the call.
Press OFF or place the handset in the
telephone base or handset charger to
exit the call. The call continues on the
other handset until both handsets hang
up.
•
•
•
•
•
•
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, the handset flashes and you
hear a beep if someone calls while you
are already on a call.
Press FLASH on the handset to put
your current call on hold and take the
new call.
Press FLASH on the handset at any
time to switch back and forth
between calls.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
directory, caller ID log or redial list while
you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes)
from the directory, caller ID log or
redial list.
To access a number from the
directory while on a call:
Press MENU.
Press SELECT to select Directory.
Press or to scroll to the desired
entry.
Press SELECT to dial the displayed
number.
To access a number from the caller ID
log while on a call:
Press MENU.
Press or to highlight Caller ID log,
and then press SELECT.
Press or to scroll to the desired
entry.
Press SELECT to dial the displayed
number.
•
•
1.
2.
3.
4.
1.
2.
3.
4.