VTech CS6719-27

14
handset displays INT needs 2 HS.
If you have two handsets, your
handset displays Calling HS X.
If you have three or more handsets,
your handset displays
Intercom to. Use the dialing keys
to enter a destination handset. Your
handset displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
2. To answer the intercom call, press ,
, INT or any dialing key (0-9, , or
) on the destination handset. Both
handsets now display Intercom.
3. To end the intercom call, press OFF
or place the handset back in the
telephone base or charger. Both
handsets now display Intercom ended.
NOTES
You can cancel the intercom call before it
is answered by pressing OFF or INT on the
originating handset.
If the destination handset does not answer
the intercom call within 100 seconds, is on
a call or out of range, the originating handset
displays Unable to call and returns to idle
mode.
Press OFF or MUTE on the destination
handset to temporarily silence the intercom
ringer.
You can use four handsets on two pairs
of intercom calls. For example, when four
handsets are used on two pairs of intercom
calls, use the fifth handset for an outside call.
If there is an incoming call while the
originating handset displays Calling HS X,
the intercom request will be stopped and the
screen displays Incoming call.
•
•
•
•
•
•
•
Answer an incoming call during an
intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
To answer the outside call, press .
The intercom call ends automatically.
To end the intercom call without
answering the outside call, press OFF.
The telephone continues to ring.
Call transfer using intercom
Use the intercom feature to transfer an
outside call to another system handset.
During a call, press INT.
If you have two handsets, the
outside call is put on hold and your
handset displays Calling HS X.
If you have three or more handsets,
your handset displays Intercom
to. Use the dialing keys to enter a
handset number. The outside call
is put on hold and your handset
displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
To answer the intercom call on the
destination handset, press , , INT
or any dialing key (0-9, , or ).
The outside call is still on hold and both
handsets now display Intercom. You can
now have a private conversation with the
destination handset.
NOTES
To cancel the intercom call before it is
answered, press OFF, or INT on your
handset.
If the destination handset does not answer
within 100 seconds, is in use, on a call or
is out of range, the originating handset
displays Unable to call and then reconnects
to the outside call.
•
•
1.
•
•
2.
•
•