VTech CS6719-27

18
Speed dial
You can copy up to 9 directory entries into
the speed dial locations (0 and
2-9) so that you can dial these numbers
using fewer keys than usual.
The speed dial memory locations are
stored in the telephone base and are
shared by all handsets. Changes made
to the speed dial entries on one handset
apply to all.
Assign a speed dial entry
Press MENU when the phone is not in
use.
Press or to scroll to Directory, then
press SELECT.
Press or to scroll to Speed dial,
then press SELECT.
Press or or the dialing keys (0 or
2-9) to choose the desired speed dial
location.
Press SELECT. The screen displays Copy
from DIR... and then the first entry in
the directory.
Press or to browse to the desired
entry.
-OR-
Use the alphabetical search to find the
desired entry.
Press SELECT to save. You hear a
confirmation. The name (up to 12
characters) appears in the selected
speed dial location.
NOTES
If the directory is empty, when you press
SELECT in Step 5, the screen displays
Directory empty.
If the speed dial location you selected is
occupied, the new directory entry you
selected replaces the old one. Take caution
not to replace entries you do not wish to
delete from the speed dial locations.
1.
2.
3.
4.
5.
6.
7.
•
•
Reassign a speed dial entry
Press MENU when the phone is not in
use.
Press or to scroll to Directory, then
press SELECT.
Press or to scroll to Speed dial,
then press SELECT.
Press or , or use the dialing keys
to choose the speed dial location you
want to reassign.
Press SELECT twice. The screen
displays Reassign SD.
Press SELECT. The screen displays Copy
from DIR... and then the first entry of
the directory.
Press or to browse to the desired
entry.
-OR -
Use the alphabetical search to find the
desired entry.
8. Press SELECT to save. You hear a
confirmation. The name (up to 12
characters) appears in the selected
speed dial location.
Dial a speed dial number
Press and hold a dialing key (0 or
2-9) to dial the number stored in the
corresponding speed dial location.
When the speed dial location is empty, the
screen displays the speed dial list.
See Assign a speed dial entry to add a
new entry.
1.
2.
3.
4.
5.
6.
7.
•