VTech CS6859 - Answering System Operation; Answering System and Voicemail; Remote Access

9
Answering system operation
Your telephone has a built-in answering system and supports voicemail
feature offered by your telephone service provider (subscription is required,
and fees may apply).
Answering system and voicemail
To use the built-in answering system:
Refer to this Abridged user’s manual for abbreviated instructions.
For complete instructions, see the online Complete user’s manual at
www.vtechphones.com.
To use the voicemail:
Press and hold 1 to dial the preset voicemail number, and then
enter a security code. Contact your telephone service provider for
detailed information.
The built-in answering system must be turned on to answer and
record messages.
Repeat the playing message.
Press twice to listen to the
previous message.
•
•
Delete the playing message.•
Skip to the next message.•
Adjust the speaker volume.•
Start message playback.
Stop messge playback.
•
•
Turn the answering systemTurn the answering system
on or off.
•
Go to page 6 to learn some common settings for your
answering system.
Remote access
You can access the answering system remotely from any touch-tone
telephone. The preset remote access code is 19.
Dial your telephone number from any touch-tone telephone.
When the answering system answers, enter the two-digit remote
access code.
Press 5 to hear a list of remote commands.
Enter the desired remote command code.
Hang up or press 8 to end the call.
1.
2.
3.
4.
5.
i