VTech CS6919 User Manual

5
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
Use only the adapters provided.
Make sure the electrical outlets are not
controlled by wall switches.
The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
TIP
If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
Connect the charger
•
•
•
•
Mount the telephone base
2 Align and place the wall mount
bracket on the standard wall plate.
Connect the telephone line cord to
the telephone base. Route it through
the wall mount bracket, and then
connect it to the wall jack.
1.
A

VTech CS6919 Specifications

General

DECT 6.0 Technology	Yes
Caller ID/Call Waiting	Yes
Handset Speakerphone	Yes
Backlit Keypad and Display	Yes
Intercom Between Handsets	Yes
Conference Between an Outside Line and Up to 2 Cordless Handsets	Yes
Voicemail Waiting Indicator	Yes
Display	LCD
Phonebook Memory	Yes
Redial	Yes
Mute	Yes
Volume Control	Yes
ECO Mode	Yes
Frequency	1.9 GHz
Range	Up to 1000 feet
Answering System	No
Expandable System	Up to 5 handsets
Battery Type	Rechargeable Ni-MH
Battery Life	Up to 7 hours talk time
Phonebook Capacity	50