VTech CS6928-2 User Manual

21
NOTE
If you save an entry which already exists
in the phonebook, the handset displays
Number repeated and then returns to
previous screen.
Delete the caller ID log entries
Search for the desired caller ID log
entry (see Review the Caller ID log).
Press DELETE to delete the
displayed entry. The screen displays
Deleting.... Then you hear a
confirmation tone.
To delete all entries:
Press MENU when the phone is not
in use.
Press or to scroll to Caller ID
log, and then press SELECT.
Press or to scroll to Delete all,
and then press SELECT.
When the screen shows Delete all?.
Press SELECT to confirm. The
screen displays Deleting... and then
you hear a confirmation tone. The
screen returns to the previous menu.
•
1.
2.
1.
2.
3.
4.
Call block
If you have subscribed to caller ID
service, you can set the telephone
to block unknown calls and certain
undesired calls. The call block list can
store up to 20 entries.
When a call is blocked, the caller will
hear a simulated busy tone for one ring
cycle. The call recipient may pick up the
call during the first ring when there is no
caller ID information. Otherwise, the call
is disconnected.
Block unknown calls
All incoming calls with unknown
numbers will be blocked.
Press MENU when the handset is not
in use.
Press or to choose Call block,
then press SELECT.
Press or to choose Calls w/o
num, then press SELECT.
Press or to choose Unblock or
Block, then press SELECT. You hear
a confirmation tone.
Add a call block entry
Press MENU when the phone is not
in use.
Press or to choose Call block,
and then press SELECT.
Press SELECT to choose
Block list.
Press or to choose Add new
entry, and then press SELECT.
When Enter number displays, use
the dialing keys to enter a number (up
to 30 digits).
1.
2.
3.
4.
1.
2.
3.
4.
5.

VTech CS6928-2 Specifications

General

Brand	VTech
Model	CS6928-2
Category	Telephone
Language	English