VTech CS6928-2 User Manual

24
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset and telephone base without
disconnecting the call. The next call
rings normally at the preset volume.
Press OFF or MUTE on the handset
and it displays Ringer muted and .
Press VOL+ or VOL- on the
telephone base to adjust the ringer
volume.
NOTES
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted. When you turn on the quiet
mode, the answering system turns on
automatically.
To set the duration and turn on the
quiet mode:
Press and hold when the
handset is not in use.
The handset displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
Press SELECT to save. You hear
a confirmation tone. The handset
displays Quiet mode on and .
•
•
•
1.
2.
3.
To turn off the quiet mode:
Press and hold when the
handset is not in use. The handset
displays Quiet mode off briefly and
then returns to idle.
NOTE
When you change the settings of the
ringer tone or ringer volume, you can still
hear the samples even if the quiet mode
is on.
•
•

VTech CS6928-2 Specifications

General

Brand	VTech
Model	CS6928-2
Category	Telephone
Language	English