27
After you deleted your own recorded
announcement, the answering
system answers calls with the default
announcement.
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if you
are calling from outside your local area.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press or to scroll to Ans sys
setup, and then press SELECT.
Press or to scroll to # of rings,
and then press SELECT.
Press or to choose 2, 3, 4, 5, 6 or
Toll saver, and then press SELECT.
You hear a confirmation tone.
Turn the call screening on
or off
Use this feature to choose whether
incoming messages can be heard while
they are being recorded.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press or to scroll to Ans sys
setup, and then press SELECT.
•
1.
2.
3.
4.
5.
1.
2.
3.
Press SELECT to choose Call
screening.
Press or to choose On or Off.
Press SELECT to save and you hear
a confirmation tone.
Turn the message alert tone on
or off
When the message alert tone is set to
on, and there is at least one new
message, the telephone base beeps
every 10 seconds. The message alert
tone is preset to off.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, then press SELECT.
Press or to scroll to Ans sys
setup, then press SELECT.
Press or to scroll to Msg alert
tone, then press SELECT.
Press or to choose On or Off.
Press SELECT to save and you hear
a confirmation tone.
The answering system must be turned on
for the message alert tone to be functional.
Press any key on the telephone base
(except /FIND HANDSET) to temporarily
silence the message alert tone.
4.
5.
6.
1.
2.
3.
4.
5.
6.
•
•