11
Set date and time
Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
Press MENU when the phone is not
in use.
Press or to choose Set date/time,
and then press SELECT.
Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then press SELECT.
4. Use the dialing keys (
0-9) to enter the
hour (HH) and minute (MM). Then
press or to choose AM or PM.
5. Press
SELECT to save. Then the
screen returns to the previous menu.
You hear a confirmation tone.
•
1.
2.
3.
Home area code
If you dial your local calls using only
seven digits (area code not required),
you can program your home area code
so that when you receive a call within
your local area, the telephone number
is automatically stored without the area
code in the caller ID log.
Press MENU when the phone is not
in use.
Press or to choose Settings, and
then press SELECT.
Press or to choose Home area
code, and then press SELECT.
Use the dialing keys to enter a
three-digit home area code.
Press DELETE on the handset or
X/DELETE on the telephone to
delete a digit.
Press and hold DELETE on the
handset to delete all digits.
Press SELECT to save your
selection. Then the screen returns
to the previous menu. You hear a
confirmation tone.
If, in the future, your telephone service
provider requires you to dial the area
code when making a local call, or, if you
move to a location that requires it, delete
the home area code you have already
programmed, following the steps above.
After you have deleted the home area
code, _ _ _ will appear on the display.
1.
2.
3.
4.
•
•
5.
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
