VTech CS6949-3 User Manual

12
Dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary)
service, you need to change the dial
mode to pulse dialing before using the
telephone to make a call.
Press MENU when the phone is not
in use.
Press or to choose Settings,
and then press SELECT.
Press or to choose Dial mode,
and then press SELECT.
Press or to choose Touch-tone
or Pulse.
Press SELECT to save your
selection. Then the screen returns
to the previous menu. You hear a
confirmation tone.
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This
is useful if you need to send touch-
tone signals to access your telephone
banking or long distance services.
During a call, press .
Use the dialing keys to enter the
number. The telephone sends
touch-tone signals. The telephone
automatically returns to pulse dialing
mode after you end the call.
1.
2.
3.
4.
5.
1.
2.
Telephone Operations
Telephone base control key panel:
Handset control key panel:

VTech CS6949-3 Specifications

General

Speakerphone	yes
Expandable	yes
Volume Control	no
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	30 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 5
Backlit Keypad	yes
Frequency	dect 6.0 digital
Battery Capacity	300 milliampere hours

Weight and Dimensions

Depth	7.8 inches
Height	4.4 inches
Net Weight	32 ounces