EN - 36
Technical specification
Near Term Cordless 1-line - CTM-A2415
Near Term Cordless Accessory Handset & Charging Stand - CTM-2415HC
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-198.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary
according to environmental conditions at the time of use.
Power requirement Handset: 2.4V Ni-MH battery
Telephone base backup battery 2.4V Ni-MH battery
Telephone base: 6V DC @400mA
Charging stand: 6V DC @400mA
Message waiting signal Steady/periodic high voltage pulse, periodic low voltage pulse, reverse
polarity, FSK, Siemens and/or Panasonic
Speed Dial memory Telephone base: up to 4 memory locations; up to 32 digits
Handset: up to 4 memory locations; up to 32 digits
Size Telephone base:
Handset:
Charging stand:
2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
To Next Page
Loading...
