69
Telephone operation
SIP contemporary trimstyle 2-line - S2320/S2320-6VDC
Telephone operation
Intercom
Use this feature for conversations between two handsets.
To initiate an intercom call:
Press INTERCOM when the handset is not in use. It beeps and the INTERCOM key ashes. All destination cordless handsets and
the main telephone base ring. The INTERCOM keys on the cordless handsets and INT key on the main telephone base ash.
To initiate an intercom call during a call:
During a call, press HOLD to put the current call on hold. Then press INTERCOM. It beeps and the INTERCOM key ashes. All
destination cordless handsets and the main telephone base ring. The INTERCOM keys on the cordless handsets and INT key on
the main telephone base ash.
To answer an intercom call:
Press INTERCOM on the handset.
To answer an incoming call during an intercom call:
Press the ashing line key on the handset. The intercom call ends automatically.
To end an intercom call:
Press OFF or place the handset back in its telephone base.
Conference call
This telephone allows three-way conversations.
To initiate a conference call:
Place a call to the rst party.
Press HOLD to place the rst party on hold.
Place a second call on the other line.
Once the second party is on the line, press CONF to start a three-way conference.
To initiate a conference call while both calls are on hold:
Press CONF to start a three-way conference.
To end a conference call:
Press OFF on the handset.
Place the handset back in its telephone base.
When there is more than one handset on the conference call, the call ends when all handsets hang up.
•
•
1.
2.
3.
4.
•
•
•
To Next Page
Loading...
Need help?
General
