VTech Digiart Creative Easel - TRANSFORM FROM DRAWING TABLE TO EASEL

Step 2:
Hold the Blackboard/Whiteboard (A) with one hand and with the other hand, move the back legs slowly backward
until the Blackboard/ Whiteboard (A) lies horizontally on the four Legs.
Step 3:
Snap A2 into place and attach both Buckles to the Table Hooks and tighten the Buckles by pushing them inward. The
Drawing Table is now ready to use and the LED Screen Area will rotate automatically.
TRANSFORM FROM DRAWING TABLE TO EASEL
Step 1:
Make sure the unit is turned OFF before transforming. Loosen the Buckles by pressing the Latch Button and at the
same time pulling the Buckle Handles outward.