19
Bluetooth
Connect a paired cell phone or headset
If you need to connect your paired cell phone or headset to the telephone
base manually:
Press CELL 1 and/or CELL 2/HEADSET on the telephone base when it is
not in use. The CELL 1 and/or CELL 2/HEADSET light flashes.
When the cell phone or headset is connected to the telephone base, you hear
two beeps. The corresponding status icon (
1
/
2
) displays. The corresponding
device light ( CELL 1 and/or CELL 2/HEADSET ) turns on.
Disconnect a paired cell phone or headset
If you need to disconnect a paired cell phone or headset
from the telephone base, refer to the user’s manuals of
your cell phone or headset for instructions to disconnect a
Bluetooth device.
If you press and hold CELL 1 and/or
CELL 2/HEADSET on the telephone base, the
existing paired cell phone in that slot will be erased.
See Add a Bluetooth enabled cell phone (page 17) and
Add a Bluetooth enabled headset (page 18) on how to pair and connect a new
cell phone or headset.
Review the cell devices list
Press MENU on the handset when it is not in use.
Press or to highlight Bluetooth, and then press SELECT.
Press or to highlight Device list, and then press SELECT.
1.
2.
1.
2.
3.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
