VTech DS6621 Abridged User Manual

11
5PSFWJFXDBMMCMPDLMJTU
Press .&/6 when the phone is not in use.
Scroll to $BMMCMPDL, and then press 4&-&$5.
Scroll to #MPDLMJTU, and then press 4&-&$5.
Press 4&-&$5 to choose 3FWJFX.
5PFEJUBDBMMCMPDLFOUSZ
When the desired entry displays, press 4&-&$5.
Use the dialing keys to edit the number, and then press 4&-&$5.
Use the dialing keys to edit the name, and then press 4&-&$5 to save.
5PTBWFBDBMMFS*%MPHFOUSZUPDBMMCMPDLMJTU
1. When the desired caller ID log entry displays, press 4&-&$5.
2. Scroll to 5P$BMMCMPDL then press
4&-&$5.
3. Use the dialing keys to modify the number, and then press 4&-&$5.
4. Use the dialing keys to modify the name, and then press 4&-&$5 to save.
5PEFMFUFBDBMMCMPDLMJTUFOUSZ
When the desired call block list entry displays, press %&-&5&.
5PTFUnCMPDLDBMMTXJUIPVUOVNCFSoPQUJPO
Press .&/6 when the phone is not in use.
Scroll to $BMMCMPDL, and then press 4&-&$5.
Scroll to $BMMTXPOVN, and then press 4&-&$5.
Scroll to choose /PUCMPDL or #MPDL, and then press 4&-&$5.
"CPVUBOTXFSJOHTZTUFNBOEWPJDFNBJMTFSWJDF
For message recording, your telephone has a built-in answering system, and
it also support voicemail service offered by your telephone service provider
(subscription is required, and fee may apply).
The main differences between them are as follows:
$BUFHPSZ #VJMUJOBOTXFSJOHTZTUFN
7PJDFNBJMGSPNUFMFQIPOF
TFSWJDF
Storage Messages are stored in the telephone base. Messages are stored in a server
or system provided by your
telephone service.
Maximum
number of
messages
This depends on the design of telephone
base. You cannot change the maximum
number of messages that can be recorded.
This may vary with your
telephone service plan (fee
may apply). Contact your
telephone service provider for
more information.
Method
to retrieve
messages
Usually, there are two ways to retrieve messages:
Press a button on the telephone base; or
Access remotely with an access code.
•
•
To retrieve messages, you
need an access number and/or
a secret code provided by your
service provider.
4FUZPVSCVJMUJOBOTXFSJOHTZTUFN
Your answering system has various features, read below for the basic settings.
Default settings are indicated by asterisks(*).
.FOV %FTDSJQUJPO 0QUJPOT
"OOPVODFNFOU
Play, record, or delete an announcement for
incoming calls.
1MBZ<>%FM<>
3FD<>
%FMFUFBMMPME
Delete all old (reviewed) messages.
/"
3FDPSENFNP
Record a memo as reminders for yourself or others
using the answering system.
/"
"OTXFSPOPGG
Turn on or off the answering system.
"OTXFS0O
"OTXFS0GG
7PJDFHVJEF
Follow audio instructions to set basic features.
/"
"OTTZTTFUVQ
Change the settings of call screening, number of rings,
remote code, or message alert alone.
Call screening•
Set whether you hear the callers while they are leaving
messages to you.
4DSFFOJOH0O
4DSFFOJOH0GG
# of rings•
Set the number of times the telephone rings before the
answering system answers.
5PMMTBWFS

Remote code•
Set a two-digit security code to access the answering
system remotely from any touch-tone telephone.

Msg alert alone•
Set to alert you when you have new messages.
5POF0GG
5POF0O
1.
2.
3.
4.
1.
2.
3.
•
1.
2.
3.
4.

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters