4. Operation
44 EzRay Air Portable (Model: VEX-P300) User Manual
Sleep Mode 2
Sleep Mode 2 starts when the device stays inactive for 5 minutes after entering Sleep
Mode 1 (To change the default waiting time for Sleep Mode 2, see 5.3.7 Waiting Time
Setting for the Sleep Mode 2).
If the battery charger is connected to the device, Sleep Mode
1 is maintained.
When Sleep Mode 2 starts, all displays are turned off on the Control panel, as shown in
the right figure.
Brightness: Lightly dark Brightness: Dark
1. To return to normal operation, press any button on the device (except for the X-
ray Exposure Button).
When the device is not in use, turn off the power to avoid
battery consumption.
To Next Page
Loading...