5. Service Mode
EzRay Air Portable (Model: VEX-P300) User Manual 59
ENGLISH
5.3.9 Buzzer On/Off
Follow the procedure below to turn on/off the buzzer. Buzzer On mode has three
options: Battery Level 1 (flickering) warning only, Power Down Mode warning only, and
both.
Service Mode No. Item
n.22 Buzzer On/Off
To change the setting,
1. Select n.22 and press the jog dial. The default setting “002” (Buzzer On for
Power Down Mode only) is displayed on the control panel, as shown in the right
figure.
2. Turn the jog dial to select an option out of the four options, as described below.
3. Press the dial again and hold it until a beep is heard.
4. Restart the device to check if the new setting is saved correctly (optional).
“000” = Buzzer Off
“001” = Buzzer On for Battery Level 1 (flickering) warning only
“002” = Buzzer On for Power Down Mode warning only (default)
“003” = Buzzer On for both
To Next Page
Loading...