VTech ia5824 User Manual

www.vtechphones.com
28
Battery information
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
replaced.
• To reduce the
risk of re or
injury to persons
or damage to the
telephone, read
and follow these
instructions
carefully: Charge
the battery
provided with
or identied for
use with this
product only in
accordance with
the instructions
and limitations
specied in this
user’s manual.
Battery care and maintenance
After your battery is fully charged, you can expect the following performance:
Operation Operating time
While in use (talking) up to 5 hours
While not in use (standby*) up to 7 days
* Handset is off the telephone base but not in use.
• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every ve seconds.
— The screen displays BATTERY LOW and the low battery icon.
• Place the handset in the base so the charge light turns on. The battery is typically fully charged in 16
hours.
• You can keep the battery fully charged by returning the handset to the base after each use.
Replace the handset battery
1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding the
cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery’s plug with the socket
pins, and snap the plug into place. Snap the battery in the
compartment, as described in Installation, on page 3.
4. Replace the cover by sliding it up into place.
5. The new battery must be charged before using the phone.
Place the handset in the base and allow it to charge for
at least 16 hours the rst charge. The telephone might
operate before that, but for best performance, let the
battery charge fully.

VTech ia5824 Specifications

General

Brand	VTech
Model	ia5824
Category	Telephone
Language	English