www.vtechphones.com
15
Basic operation
Telephone operation
Temporary tone dialing
If you have pulse (rotary) dialing, you can change from
dial pulse to touch tone dialing by pressing TONE*. This
is useful if you need to send touch tone signals for access
to telephone banking or long distance services.
1. Press TALK/FLASH.
2. Press TONE*.
3. Dial the number.
4. When you end the call by pressing OFF, the phone
automatically returns to pulse dialing.
Headset jack
You can use this telephone handsfree when you install
any VTech 2.5 mm headset, purchased separately.
Plug the headset into the jack located on the right side
of the handset (under the small rubber ap). Do not force
the connection, but make sure the plug ts securely.
To purchase a headset, visit us on the web at www.
vtechphones.com or call us at 1-800-595-9511. In
Canada, go to www.vtechcanada.com or call us at 1-
800-267-7377.
• The temporary tone
feature is useful if you
need to send touch
tone signals for access
to telephone banking
or long distance
services.
To Next Page
Loading...
Need help?
General
