VTech ia5847 User Manual

www.vtechphones.com
17
Basic operation
Call transfer
An external call can be forwarded from one handset (HS1) to the other handset (HS2) by following
these steps:
1. While on a call, press SELECT on HS1 to forward the call to HS2.
HS1 will show: HS2 will ring and show:
2. Press TALK/FLASH on HS2 to answer the forwarded call. HS1 will return to the idle mode.
Clear voice mail alert
If after you review your message(s) your message waiting alert does not go off, you may manually
turn it off by:
1. Press PROG.
2. Press or until screen displays CLR VOICEMAIL.
3. Press SELECT, the screen displays:
4. Press or to select YES or NO.
5. Press SELECT to choose the desired setting. You’ll hear a conrmation tone.
Telephone operation
CLEAR? YES
TRANSFERRED CALLCALL TRANSFERRED
• Only one handset
can be on a call at a
time. For example,
if HS1 is on a call
and HS2 presses the
TALK/FLASH button,
OTHER HANDSET
ON OR OUT OF
RANGE will display.
• If the HS2 cannot
be found, HS1 will
emit an error tone
and continue the call
automatically. Before
HS2 answers, HS1
can press TALK/
FLASH to cancel the
forward function and
continue the external
call.
• If HS2 doesn’t
respond within 30
seconds, HS1 will
start ringing until
TALK/FLASH is
pressed to pick up the
returned call. If it is
not answered within
another 30 seconds,
the external call will
end automatically.

VTech ia5847 Specifications

General

Brand	VTech
Model	ia5847
Category	Cordless Telephone
Language	English