What to do if VTech InnoTab Max has no screen display after pressing the Power button?
If your VTech Tablet's screen doesn't turn on when you press the Power button, it's likely that the battery is low. Try recharging the battery or plugging the tablet into a wall outlet.
Why VTech Tablet screen turns on, then immediately off?
If your VTech Tablet screen turns on and then immediately off, the battery power is likely low. Recharge the battery to resolve this issue.
What to do if VTech InnoTab Max Tablet has no picture on screen and Power button has no effect?
If there's no picture (or an incorrect picture) on the screen and the Power button doesn't work, the program may need to be reset. Force the VTech InnoTab® to turn off by holding down the Power button until the screen shuts off (approximately 8 seconds). Then, turn the tablet back on again.
How to fix VTech InnoTab Max Tablet screen with no sound?
If your VTech Tablet screen displays but there is no sound, it could be due to a couple of reasons. First, check if the volume is turned down and adjust the volume control. Second, if headphones are connected, unplug them from the headphone jack.
To Next Page
General