8
Play messages
To play messages with the telephone base:
Press /PLAY/STOP when the telephone is not in use.
Options during playback:
Press /VOL+ or /VOL- to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing.
Press /REPEAT twice to listen to the previous message.
Press X/DELETE to delete the current message. The system
advances to the next message.
Press /PLAY/STOP to stop.
To play messages with a handset:
Press MENU/SELECT twice when the telephone is not in use.
If you have either new or old messages, the messages play
automatically. If you have both new and old messages:
To play new messages, press MENU/SELECT to select
>Play new msgs.
To play old messages, scroll to select >Play old msgs and
then press MENU/SELECT.
Options during playback:
Press / VOL or VOL/CID to adjust the speaker volume.
Press EQ to adjust the handset message playback audio
quality.
Press 6 to skip to the next message.
Press 4 to repeat the message currently playing. Press 4 twice
to listen to the previous message.
Press 3 to delete the current message. The system advances
to the next message.
Press 5 to stop.
Delete all messages
To delete all messages at the telephone base:
Press X/DELETE when the phone is not in use.
To delete all messages with a handset:
Press MENU/SELECT when the handset is not in use.
Scroll to select >Answering Sys and then >Delete all old
messages? Press MENU/SELECT.
Call intercept
If you want to talk to the person whose message is being
recorded, press /FLASH or on the handset.
Access the answering system remotely
Dial your telephone number from any touch-tone telephone.
When the system plays your announcement, enter the
two-digit remote code. The preset code is 19.
Then you can enter one of the following remote commands.
Hang up or press 8 to end the call.
•
•
•
•
•
•
•
•
•
•
•
•
•
1.
2.
1.
2.
3.
4.
Command Function
1 Play all messages.
2 Play only new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
44 Skip to the previous message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record a new announcement.
8 End the call.
0 Turn the answering system on or off.
96-007722-010-100
IMPORTANT!
If you have difculty with your telephone and headset, please
refer to the user’s manual for a full set of installation and
operation instructions. For customer service, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go
to www.vtechcanada.com or call 1 (800) 267-7377.
To Previous Page
Loading...
Need help?
General
