VTech KidiFluffies Dog - Page 16

16
Select this item to perform a system reset. Once pressed
all KidiFlufes data will be deleted. Follow the on-screen
instructions to complete the system reset if needed.
TROUBLESHOOTING
Check this section if you experience difculty with operating your
KidiFlufes.
KidiFlufes has stopped
working or the LCD does
not display.
1. Ensure that the batteries are
installed correctly.
2. Replace with a new set of batteries.
The LCD is ON but
KidiFlufes does not
respond to sound or
motions.
If the LCD backlight is OFF, that
means your unit is in Standby mode.
Press the LEFT or RIGHT button to
wake up the unit.
KidiFlufes does not
respond to touch.
1. Make sure you are swiping the
correct area of the forehead. Please
refer to the PRODUCT FEATURES
for details.
2. Try swiping the forehead using your
whole hand.
3. Keep KidiFlufes in a cool, dry
place as humidity can affect the touch
sensors.
KidiFlufes does not
response to sounds.
1. Speak to KidiFlufes when it is
silent as it cannot detect sound when
there is other noise.
2. Try to speak clearly into the
microphone. When KidiFlufes
is responding to you, you cannot
continue speaking until it has nished
its response.
KidiFlufes always says I am
too loud.
1. Make sure there is no background
noise when speaking to KidiFlufes.
2. Reduce your speaking volume
or move further away from the
microphone.
TROUBLESHOOTING