5
5
5
POWER SOURCE
The PAW Patrol Learning Watch operates using a CR2450 battery.
The CR2450 battery included with the product is for demo purposes
only.
BATTERY INSTALLATION
NOTE: For best performance, remove the factory-
installed battery from the PAW Patrol Learning
Watch and use a new battery.
1. Locate the battery cover on the back of the unit
and open it with a screwdriver (not included).
2. Remove the battery cover and insert a
CR2450 battery as illustrated.
3. Replace the battery cover and fasten the
screw.
BATTERY NOTICE
• Use one CR2450 Lithium coin battery only for this toy. Do not
use rechargeable Lithium ion battery LIR2450. This toy is not
compatible with LIR2450.
• The coin battery used with this product should be kept away
from small children who might still put things in their mouths. If
the coin battery is swallowed, consult a doctor immediately.
• Insert the coin battery with the correct polarity.
• Do not use a damaged coin battery.
• Do not short-circuit the coin battery terminals.
• Remove exhausted coin battery from the product.
• Remove coin battery during long periods of non-use.
• Do not dispose of coin battery in re.
• Do not charge non-rechargeable coin battery.
• Rechargeable batteries are to be removed from the toy before
being charged. (if removable)
• Rechargeable batteries are only to be charged under adult
supervision.
To Next Page
Loading...
Need help?
General