26
Test the Best Location for the Baby Unit
If you plan to install your baby unit in a designated location, and use your home
Wi-Fi network to connect your video monitor, you need to test which of your
selected monitoring areas within the house have good Wi-Fi signal strength.
After you have powered on your parent unit, you can use your parent unit’s Wi-
Fi signal strength indicator to assist in checking. Once you have identied the
suitable location, you can install your baby unit. Adjust the distance between your
baby unit and the Wi-Fi router if needed.
Note: Depending on surroundings and obstructing factors, such as the eect distance and
internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the
Wi-Fi signal strength, adjust the distance or direction of your parent unit. Check with your parent
unit again.
To Next Page
Loading...
