VTech RM2751 - Product Maintenance; Technical Specifications

39
Maintenance
To keep this product working well and looking good, follow these guidelines:
• When you are not going to use the video monitor for some time, store the parent unit, the
baby unit and the adapters in a cool and dry place.
• Avoid placing it near heating appliances and devices that generate electrical noise (for
example, motors or uorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft damp cloth.
• DO NOT immerse the parent unit and the baby unit in water and do not clean them under the
tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the parent unit and the baby unit are dry before you connect them to the mains
again.
• Clean the USB charging port of dust, dirt, and lint regularly.
Technical Specications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2412 - 2462 MHz
Channels 11
LCD 2.8’’ Colour LCD
(IPS 320x240 pixels)
Nominal e󰀨ective range Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements Parent unit: 3.6V 2600mAh, 9.36Wh Lithium-ion
battery
Baby unit power adapter: Output: 5V DC @ 1A
Parent unit power adapter: Output: 5V DC @ 1A