18
Basic Operation
After powering up your baby monitor, the parent unit streams live video in direct
mode. Recommend to follow the instructions on screen to set up home Wi-Fi
network with your monitor for functionality enhancements and mobile access. See
Download App for Mobile Access
and
Set up Wi-Fi Connection
in this user
guide.
Power on/o
1�
Slide the power switch to
ON
to turn on your baby unit. Slide to the opposite
direction to turn o.
Notes:
• When powering up, the baby unit’s status LED turns on. It will turn o after a while and keeps
o.
• The status LED is set to off by default. If you want to keep the LED on, press
MENU/
SELECT
, then go to
> Status LED
and turn it on.
•
WARM
Camera lens and surface may get warm during normal operation.
To Next Page
Loading...
