VTech RM7756HD User Manual

36
Baby Unit Settings
Night Vision
The baby unit has infrared LEDs that allow you to see your baby clearly at night
or in a dark room. When the baby unit being viewed detects low light levels, the
infrared LEDs switch on automatically.
When the night vision mode is activated, the images from the baby unit appear in
black and white on the screen, and also appears.
Turn On/O Night Vision
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby Unit Settings
menu.
3�
Press to select
Night Vision
.
4�
P
ress
or
to turn on/o󰀨.
Notes:
• It is normal to see a short white glare on your parent unit screen as the baby unit adapts to
the dark environment.
• If you adjust the night vision mode while night vision is not activated, the new settings will be
saved and applied the next time it activates.
Tip:
The video quality may vary depending on the surrounding environment and interfering
factors like lighting, objects, colour and backgrounds. Adjust the baby unit angle or place the
baby unit at a higher elevation to prevent glare and a blurry display.
Turn on or o󰀨 Baby Unit
Status LED
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby Unit
Settings
menu.
3�
Press repeatedly to select
Status LED
.
4�
P
ress
or
to turn on/o󰀨.
Adjust Baby Unit Speaker Volume
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby Unit Settings
menu.
3�
Press repeatedly to select
Camera Volume
.
4�
P
ress
or
to adjust (Level 1 - Lowest to Level 5 - Highest).

VTech RM7756HD Specifications

General

Brand	VTech
Model	RM7756HD
Category	Monitor
Language	English