VTech Smart Sounds Baby Keys - Battery Installation and Safety; Installing Batteries; Battery Safety Precautions

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit.
3. Use a screwdriver to loosen the screw.
4. Install 3 new LR44 button cell batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• UsethreeLR44Alkalinebuttoncellbatteriesonlyforthistoy.
• Thebuttoncellbatteriesusedwiththisproductshouldbekeptaway
from small children who might still put things in their mouths. If the
button cell batteries are swallowed, consult a doctor immediately.
• This product contains button cell batteries. Swallowing a button
cell battery can cause internal chemical burns in as little as two
hours and can lead to death. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate
medical attention.
• Insertthebuttoncellbatterieswiththecorrectpolarity.
• Donotusedamagedbuttoncellbatteries.
• Donotshort-circuitthebuttoncellbatteryterminals.
• Removeexhaustedbuttoncellbatteriesfromtheproduct.
• Removebuttoncellbatteriesduringlongperiodsofnon-use.
• Donotdisposeofbuttoncellbatteriesinre.
• Donotchargenon-rechargeablebuttoncellbatteries.